BMW 1 Quiz
Body Electrical Equipment

Outside Air Temperature Sensor Removal and Installation

In this manual: Body Electrical Equipment
Introduction — 10Owner's Manual — 29Routine Care and Maintenance — 30Engine — 18Cooling and Heating Systems — 13Fuel and Exhaust Systems — 29Engine Electrical Equipment — 20Manual Transmission — 4Automatic Transmission — 4Clutch and Drive Shafts — 12Brake System — 19Suspension and Steering — 22Body — 36Body Electrical Equipment — 34Electrical Circuit Diagrams — 30On-board diagnostic system — 5
~1min read

The outside air temperature sensor is located in the trim on the right side, under the front bumper.

REMOVAL

1. Pull the temperature sensor (1) down out of the plastic clips (2).

2. Расстыкуйте штекерное соединение. Для этого вдавите пальцами стопор.

2. Disconnect the electrical connector. Press the lock tab with your fingers to release it.

INSTALLATION

1. Connect and lock the electrical connector.
2. Insert the temperature sensor into the clip.

Test yourself

A quick BMW 1 quiz: every answer comes with an explanation and a link to the manual page.