Cargo Net - Rear Installation

To install the cargo net in the rear, perform the following:

1. Without folding the rear seats, remove the concealed rod by pulling up on the two handles.

2. Insert the net rod into the larger-diameter holes at the rear of the roof side rail, then secure it by sliding it into the smaller-diameter hole.

3. Hook the strap hooks onto the two anchors on the luggage compartment floor.

4. Pull the straps to remove slack.

After installing the net, check the net tension by pulling the strap firmly.

The strap should be taut after the hook is securely engaged with the loop.

REMOVAL

1. Loosen the strap adjusters and unhook the hooks from the anchors.

2. Remove the net rod by sliding it out of the locked position.