Bravo tail light

In the trunk, remove lamp cover -1-. To do so, turn twist clip -arrow- 90° to the left with the ignition key. Press cover up, fold down and unhook at the bottom.

Remove multi-plug -2-.
Squeeze both locking tabs -3- together (press upper tab downward and lower tab upward at the same time) and remove bulb carrier -4-.

Press defective bulb into bulb carrier -4-, turn 90° to the left and remove.
5 - Dual-filament bulb for tail light and rear fog light
6 - Brake light
7 - Turn signal
8 - Reversing light (right tail light)
Press in new bulb and secure by turning right.
Screw bulb carrier on.
Push on plug.
Hook cover in at the bottom, press at the top and turn fastening clip 90° to the right.
Test yourself
A quick Fiat Bravo quiz: every answer comes with an explanation and a link to the manual page.