Lighting system
Side turn signal
In this manual: Lighting system
~1min read

Carefully pry out the side turn signal at the point marked with an arrow using a small screwdriver. Push the lamp slightly rearward while squeezing holder -2- together, see illustration T-5676. Caution: place paper padding or a cloth underneath to avoid damaging the paint.

Disconnect plug -1- from the bulb socket -3-.
Turn bulb socket 90° to the left and remove.
Pull bulb out of socket and replace.
Insert bulb socket into lens -4- and secure by turning right.
Insert front light into the recess, press in at the rear and engage with plastic spring -2-.
Test yourself
A quick Fiat Bravo quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?