Removing and refitting air filter
The removal procedure is described using the 1.4 L engine as an example.
On the other engines, the air filter is located on the other side of the vehicle. When removing it there, proceed in the same way.
RemovalRemove the air filter element, see page 299.

Unclip the intake air duct - 1 -.
1.4 L engine only: disconnect the vacuum hoses - 2 - from the thermovalve for intake air preheating on the upper air filter housing.
Unscrew the lower air filter housing - 3 -. Remove the lower air filter housing from the lower rubber mounting. If the lower housing cannot be removed upwards, remove the air filter downwards through the wheel arch. To do this, remove the front wheel and inner wheel arch liner, see page 204.
Insert the lower air filter housing into the lower rubber mounting and tighten the screws.
Clip in the intake air duct.
Install the air filter element, see page 299.
1.4 L engine only: connect the vacuum hoses to the thermovalve on the upper air filter housing.
Test yourself
A quick Fiat Bravo quiz: every answer comes with an explanation and a link to the manual page.