Body (Interior / Exterior / Electrical)

Luggage Trim

11steps
~66min
3/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 11

Contents:

Components and Components Location

Component and Component Location

Luggage Trim
1. Cargo Screen
2. Luggage Covering Board
3. Rear Transverse Trim
4. Luggage Side Trim
4-a. 7.8 - 11,8 N·m

Luggage Side Trim Removal and Installation

Removal

  • When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
  • When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
  • When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
Luggage Side Trim [Driver Side]
  1. Remove the rear seat assembly. (Refer to Rear Seat - "Rear Seat Assembly")
  2. Remove the rear transverse trim. (Refer to Luggage Trim - "Rear Transverse Trim")
  3. Remove the trim (A) after removing the bolts.

    Tightening torque : 7.8 - 11,8 N·m

    Clip position :
  4. Disconnect the ruggage lamp connector (A) and accessory socket connector (B).
  5. Remove the rear seat assembly. (Refer to Rear Seat - "Rear Seat Assembly")
  6. Remove the rear transverse trim. (Refer to Luggage Trim - "Rear Transverse Trim")
  7. Remove the trim (A) after removing the bolts.

    Tightening torque : 7.8 - 11,8 N·m

    Clip position :
Luggage Side Trim [Passenger Side]

Installation

  • When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
  • When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
  • When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
  1. Install in the reverse order of removal.

Rear Transverse Trim Removal and Installation

Removal

  • When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
  • When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
  • When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
  1. Remove the tailgate weatherstrip. (Refer to Tailgate - "Tailgate Weatherstrip")
  2. Remove the luggage covering board (A).
  3. Remove the woofer speaker cover (A).
  4. Remove the rear transverse trim (A) after removing the fasteners.
    Clip position :

Installation

  • When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
  • When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
  • When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
  1. Install in the reverse order of removal.