Body Electrical System

Audio system

10steps
~60min
3/5difficulty
Done 0 of 10

Components and Component Location

Components

Connector Pin Information

No. Connector A Connector B Connector C Connector D
1 Left rear door speaker (+) ⁻ ⁻ Ground
2 Left rear door speaker (-) MIC (+) ⁻ ⁻
3 ⁻ ⁻ ⁻ Emergency Switch Input
4 ⁻ ⁻ ⁻ Passenger Seat Belt Reminder
5 ⁻ Antenna Power ⁻ ⁻
6 RVM Camera: Power Illumination (+) ⁻ PAB Off
AVM Camera: -
7 RVM Camera: Video Multimedia CAN (High) ⁻ IGN1
AVM Camera: Video (Y)
8 RVM Camera: - Keyboard Control_On ⁻ PAB On
AVM Camera: Video (C)
9 ⁻ ⁻ ⁻ Rear Left Seat Belt Unbuckled Reminder
10 AUX Right Input Battery (+) ⁻ Rear Center Seat Belt Unbuckled Reminder
11 AUX Detection Battery (+) ⁻ Rear Right Seat Belt Unbuckled Reminder
12 Steering Wheel Remote Control Ground ⁻ Emergency Switch Output
13 Left front door speaker (+) Ground ⁻
14 Left front door speaker (-) Microphone Ground ⁻
15 Right front door speaker (-) MIC (-) ⁻
16 Right front door speaker (+) RVM Camera: - ⁻
AVM Camera: Detection
17 ⁻ ⁻ ⁻
18 ⁻ ⁻ ⁻
19 ⁻ Illumination (-) ⁻
20 RVM Camera: Ground Multimedia CAN (Low) ⁻
AVM Camera: - ⁻
21 RVM Camera: Video Ground Display_Mute ⁻
AVM Camera: Video (Y) Ground ⁻
22 RVM Camera: - ACC ⁻
AVM Camera: Video (C) Ground ⁻
23 ⁻ ⁻ ⁻
24 AUX Left Input LCD Battery ⁻
25 Auxiliary ground ⁻ ⁻
26 Steering Wheel Remote Control (Ground) ⁻ ⁻
27 Right rear door speaker (-) ⁻ ⁻
28 Right rear door speaker (+) ⁻ ⁻
29 ⁻ ⁻ ⁻
30 ⁻ ⁻ ⁻
31 ⁻ ⁻ ⁻
32 RVM Camera: - ⁻ ⁻
AVM Camera: Detection ⁻
33 RVM Camera: - IGN1 ⁻
AVM Camera: Video Screen (Y) ⁻
34 RVM Camera: - ⁻ ⁻
AVM Camera: Video Screen (C) ⁻
35 ⁻ LCD Ground ⁻
36 ⁻ ⁻
37 ⁻ ⁻
38 Vehicle Speed ⁻

Repair Procedures

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Remove the heater and A/C control unit.

    (Refer to Heating, Ventilation and Air Conditioning - Heater and Air Conditioner Control) Unit (DATC)")

  3. Remove the passenger side airbag side panel.

    (Refer to Body - "Center Crash Pad Panel")

  4. Remove the head unit (A) after loosening the mounting screws.

  5. Remove the head unit after disconnecting the connectors and the antenna cable (A).

Installation

  1. Connect the audio unit connectors and the antenna cable.

  2. Install the head unit.

  3. Install the passenger side panel.

  4. Install the heater and A/C control assembly.

  5. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.