Power door lock switch

Repair Procedures

Inspection

Diagnosis using KDS

1. 1

   The body electrical system can be quickly diagnosed for faulty parts using the Kia Diagnostic System (KDS).

   The Diagnostic System (KDS) provides the following information.

   1. Self-Diagnosis: Checks and displays diagnostic trouble codes (DTC)

   2. Current Data: Checks the input/output status of the system.

   3. Actuation Test: Checks the operating condition of the system.

   4. Additional Functions: Other controls such as system option and zero point

2. 2

   Select the "Vehicle Model" and the system to be checked in order to inspect the vehicle with the scan tool.

3. 3

   Select "Driver Seat or Assist Door Module (DDM/ADM)" to check the driver seat or assist door module (DDM/ADM).

4. 4

   Select the "Current Data" menu to check the current input/output data.

   Input/output data for the sensors related to the driver seat or assist door module (DDM/ADM) can be checked.

5. 5

   If you want to forcibly check the operation of the power door lock, select "Active Test".

Removal

1. 1

   Disconnect the negative (-) battery terminal.

2. 2

   Remove the front door trim panel.

   (Refer to Body - "Front Door Trim Panel")

3. 3

   Disconnect the power window switch connector (A).

   

4. 4

   Remove the power window switch (A) after loosening the mounting screws.

   

   

Installation

1. 1

   Install the power window switch.

2. 2

   Connect the power window switch connector.

3. 3

   Install the front door trim panel.

4. 4

   Connect the negative (-) battery terminal.