Kia Stinger CK Quiz
Body Electrical System

Power seat motor

In this manual: Body Electrical System
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
12steps
~72min
3/5difficulty
Done 0 of 12

Components and Component Location

Component Location

1. Slide Motor
2. Tilt Motor
3. Lumbar Support Motor		 4. Front Height Motor
5. Cushion Extension Motor
6. Rear Height Motor

Description and Operation

Description

The power seat is operated by the following motors.

  1. Slide Motor

  2. Front Height Motor

  3. Rear Height Motor

  4. Recliner Motor

  5. Cushion Extension Motor

Repair Procedures

Inspection

Power seat motor

  1. Disconnect the negative (-) battery terminal.

  2. Disconnect the connectors for each motor.

    A: Front Height Motor

    B: Slide Motor

    C: Engine Rear Height

    D: Engine Lying Down

    E: Engine Expansion Mount Bracket

    F: Engine Support Lumber

  3. When battery power is supplied to the lumbar support motor connector, check the motor for smooth operation.

  4. Reverse the connections and check that the motor rotates in the opposite direction.

  5. If the motor operates abnormally, replace it.

    [Driver]

    [Passenger]

Remove

Front Seat

  1. Disconnect the negative (-) battery terminal.

  2. Remove the front seat assembly.

    (Refer to Body - "Front Seat Assembly")

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.