Power Seat Control Switch

Repair Procedures

Inspection

Diagnosis using KDS

1. 1

   The body electrical system can be quickly diagnosed for faulty parts using the Kia Diagnostic System (KDS).

   The Diagnostic System (KDS) provides the following information.

   1. Self-Diagnosis: Checks and displays the Diagnostic Trouble Code (DTC).

   2. Current Data: Checks the input/output status of the system.

   3. Actuator Test: Checks the operating condition of the system.

   4. Additional Functions: Other controls such as system option and zero adjustment.

2. 2

   Select the "Vehicle Model" and the system to be checked in order to inspect the vehicle with the scan tool.

3. 3

   Select "Power Seat Module (PSM)" to check the power seat module (PSM).

4. 4

   Select the "Current Data" menu to check the current input/output data.

   Input/output data for sensors related to the Power Seat Module (PSM) can be inspected.

Seat Control Switch

1. When the power seat switch is in each position, make sure continuity exists between the terminals below. If continuity does not match the specification, replace the power seat switch.

   

Driver Seat / IMS Type

[16-Way (EXT + Bolster) Type]

[14-Way (EXT) Type]

[14-Way (SLAB) Type]

[12-Way Type]

[8-Way Type]

Driver Seat / Non-IMS Type

[14-Way (EXT) Type]

[12-Way Type]

[8-Way Type]

Passenger Seat / Non-IMS Type

[12-Way (Walk-In) Type]

[12-Way Type]

[8-Way Type]

Removal

1. 1

   Disconnect the negative (-) battery terminal.

2. 2

   Remove the front seat outer cover.

   (Refer to Body - "Front Seat Outer Protective Cover")

3. 3

   Remove the slide handle (A) and the tilt handle (B).

   

4. 4

   Remove the power seat control switch (A) after loosening the mounting screws.

   

Installation

1. 1

   Install the power seat control switch.

2. 2

   Install the slide handle and the tilt handle.

3. 3

   Install the front seat outer cover.

4. 4

   Connect the negative (-) battery terminal.