Theft Deterrent / Keyless Entry

System Description

~3min read

SYSTEM DESCRIPTION

IMMOBILISER SYSTEM DESCRIPTION

(a) The immobilizer system determines whether or not to enable starting of the SFI system, based on the result of comparing the key ID code with the code registered for the vehicle. The immobilizer system compares the ID code registered in the certification ECU (smart key ECU assembly) with the ID code of the transponder chip built into the key. If the ID codes do not match, the immobilizer system is activated and the SFI system cannot be started. The certification ECU (smart key ECU assembly) manages communication between the SFI system, the ID code box (immobilizer ECU) and the steering lock ECU (steering lock actuator set or upper support set). If the ID codes of the transponder chip and the certification ECU (smart key ECU assembly) match, the certification ECU (smart key ECU assembly) allows the SFI system to start.

SYSTEM OPERATION

(a) Push-button start function

(1) When the driver (or a passenger) enters the vehicle and depresses the brake pedal while carrying the electronic key transmitter sub-assembly, the certification ECU (smart key ECU assembly) generates a request signal and transmits it to the electronic key interior antenna. When the request signal is received, the electronic key interior antenna sends another request signal to detect whether the electronic key transmitter sub-assembly is inside the passenger compartment. When the electronic key transmitter sub-assembly receives this request signal, it returns an ID code containing a reply code. The ID code sent by the electronic key transmitter sub-assembly is sent to the certification ECU (smart key ECU assembly) via the door control receiver. When the ID code is received, the certification ECU (smart key ECU assembly) analyzes it.

If the certification result is normal, the smart indicator is displayed on the multi-display. When the smart indicator is displayed and the driver presses the engine switch, the certification ECU (smart key ECU assembly) detects the engine start signal, turns on the ACC relay and then turns on the IG relay, in that order, after 0.025 seconds. At this point, the certification ECU (smart key ECU assembly) confirms that the power source mode has changed and supplies power to the steering lock actuator. Next, the steering lock ECU (steering lock actuator or upper support set) confirms that the certification ECU (smart key ECU assembly) is the correct ECU and operates the steering lock actuator motor until the steering lock is unlocked. After the steering lock is unlocked, the steering lock ECU (steering lock actuator or upper support set) sends an unlock completion signal to the certification ECU (smart key ECU assembly). On receiving this signal, the ID code box (immobilizer ECU) sends an immobilizer disable control signal to the SFI system after confirming that the certification ECU (smart key ECU assembly) is the correct ECU. Next, the certification ECU (smart key ECU assembly) sends a security indicator off signal to the security indicator (combination meter assembly).