Theft Deterrent / Keyless Entry
Symptom Table
In this manual: Theft Deterrent / Keyless Entry
~1min read
SYMPTOM TROUBLESHOOTING TABLE
HINT:
- Check the fuses and relays associated with this system before checking the suspected areas listed below.
- If the problem occurs only in certain locations or at certain times of the day, check for radio wave interference.
- If optional components are installed, make sure there is no radio wave interference from those components.
Symptom | Suspected Area | Link |
|---|---|---|
The security indicator does not flash. |
Go to "The security indicator does not flash". |
|
The immobiliser system does not operate correctly. |
Follow the procedure for "The immobiliser system does not operate correctly". |
|
The engine does not start*1 |
Certification ECU (Smart Key ECU Assy) |
|
ECM |
- |
|
SFI System |
- |
|
It is impossible to change the power source mode*1 |
Engine Switch |
|
Certification ECU (Smart Key ECU Assy) |
- |
|
Steering lock does not lock/unlock*2 |
Steering lock ECU (steering lock actuator or upper support assembly) |
- *1: Refer to the Smart Key System Malfunction Symptom Table (for Start Function).
- *2: Refer to the Malfunction Symptom Table for the steering lock system.
Was this page helpful?
.gif)