Precautions
PRECAUTION
PRECAUTIONS WHEN USING TECHSTREAM
(a) When using the Techstream with the engine switch in the OFF position, connect the Techstream to the DLC3 and turn a room light switch ON and OFF at intervals of 1.5 seconds or less until communication between the Techstream and the vehicle starts. Then select the vehicle type manually and enter the following menus: Body Electrical / Smart Key. When using the Techstream, periodically switch a room light switch between ON and OFF at intervals of 1.5 seconds or less to maintain communication between the Techstream and the vehicle.
REGISTRATION PRECAUTIONS
(a) When replacing any of the following parts, refer to the registration.
(1) Certification ECU (smart key ECU assembly)
(2) ID Code Box (Immobiliser Code ECU)
(3) Steering Lock ECU (Steering Lock Actuator or Upper Support Assembly)
(4) Electronic Key Transmitter Sub-assembly
(5) ECM
(6) Main body ECU (multiplex network body ECU)
BATTERY PRECAUTIONS
(a) The unlock function with approach may not operate immediately after the battery cables are reconnected. If this occurs, the unlock function with approach can be restored by performing a remote door lock and unlock operation.
(b) When the battery is discharged and another vehicle's battery is used to start the engine with a booster cable, move the shift lever to P, then open and close the driver's door with the engine switch in the OFF position before starting the engine.
(c) After the battery has been removed and reinstalled, be sure to wait at least 10 seconds before starting the engine. The engine may not start immediately after the battery is reinstalled.
HINT:
- After disconnecting and reconnecting a battery cable, the engine may not start on the first attempt. If this occurs, turn the engine switch OFF. The engine will start normally from the second attempt onward.
- When a battery cable is disconnected and reconnected, the power source mode returns to the mode selected before the battery cable was disconnected.