Check / Clear DTCs
CHECK / CLEAR DTCs
NOTICE:
While using the Techstream with the vehicle engine switch OFF, connect the Techstream to the DLC3 and turn a welcome light switch ON and OFF at intervals of no more than 1.5 seconds until communication between the Techstream and the vehicle starts. Then select the vehicle type in manual mode and enter the following menus: Body Electrical / Smart Key. While using the Techstream, regularly switch a welcome light switch between ON and OFF at intervals of no more than 1.5 seconds to maintain communication between the Techstream and the vehicle.
HINT:
Refer to the Techstream operator's manual for more information.
CHECK IMMOBILISER DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch to ON (IG).
(c) Turn on the Techstream.
(d) Select the following menu items: Body Electrical / Smart Key / Trouble Codes.
Body Electrical > Smart Key > Trouble Codes(e) Check the DTCs.
CHECK ECM DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch to ON (IG).
(c) Turn on the Techstream.
(d) Select the following menu items: Powertrain / Engine and ECT / Trouble Codes.
Powertrain > Engine and ECT > Trouble Codes(e) Check the DTCs.
CLEAR IMMOBILISER DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch to ON (IG).
(c) Turn on the Techstream.
(d) Select the following menu items: Body Electrical / Smart Key / Clears Codes.
Body Electrical > Smart Key > Clear DTCs(e) Clear the DTCs.
CLEAR ECM DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch to ON (IG).
(c) Turn on the Techstream.
(d) Select the following menu items: Powertrain / Engine and ECT / Clears Codes.
Powertrain > Engine and ECT > Clear DTCs(e) Clear the DTCs.