Toyota Corolla Quiz
Body

Door Window Glass

In this manual: Body
Owner's Manual — 7Controls and Instruments — 49Engine Starting and Vehicle Operation — 5Actions if the Engine Does Not Start — 18Maintenance — 30Gasoline Engines - Repair Procedures Without Engine Removal from Vehicle — 17Gasoline Engines - Removal and Overhaul — 21Diesel Engine — 26Engine Electrical Equipment — 13Cooling and Heating Systems — 17Fuel and Exhaust Systems — 14Emission Control System — 19Manual transmission — 6Automatic transmission — 9Clutch and Axle Shafts — 11Brake System — 20Suspension and Steering — 24Body — 29Electrical System — 24Wiring Diagrams — 24
~1min read

Removal and installation

PROCEDURE
1. Remove the door trim panel and the plastic water shield protecting the door from moisture (see subsection 11.12).
2. Lower the window glass.
3. Carefully remove the inner window seal from the door window opening.
4. Place a cloth inside the door panel to avoid scratching the glass, and unscrew the two glass mounting bolts.
5. Remove the glass by pulling it out of the window opening.
6. Installation is performed in the reverse order.

Test yourself

A quick Toyota Corolla quiz: every answer comes with an explanation and a link to the manual page.