Body
Center Trim Panel
In this manual: Body
~1min read
Removal and installation
PROCEDURE
1. Disconnect the negative battery cable.
Upper trim panel
2. Pull out the heater/air conditioner control knobs.

3. Release the clips at each corner using a small screwdriver, then remove the trim panel and turn it to access the electrical connectors.

4. Disconnect the connectors.

5. Remove the bolts and pull out the trim panel.
6. Installation is performed in the reverse order of removal.
Test yourself
A quick Toyota Corolla quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?