Toyota Corolla Quiz
Body

Radiator Grille

In this manual: Body
Owner's Manual — 7Controls and Instruments — 49Engine Starting and Vehicle Operation — 5Actions if the Engine Does Not Start — 18Maintenance — 30Gasoline Engines - Repair Procedures Without Engine Removal from Vehicle — 17Gasoline Engines - Removal and Overhaul — 21Diesel Engine — 26Engine Electrical Equipment — 13Cooling and Heating Systems — 17Fuel and Exhaust Systems — 14Emission Control System — 19Manual transmission — 6Automatic transmission — 9Clutch and Axle Shafts — 11Brake System — 20Suspension and Steering — 24Body — 29Electrical System — 24Wiring Diagrams — 24
~1min read

Removal and installation

PROCEDURE

1. Отвинтите три шурупа, расположенных в верхней части решетки.

1. Unscrew the three screws located at the top of the grille.

2. Вытащите верхнюю часть решетки, чтобы получить доступ к фиксаторам. Открепите

2. Pull the upper part of the grille forward to access the clips. Release them using a screwdriver and squeeze the sides together while pulling the grille outward.
3. Once the clips are released, pull out the grille and remove it.
4. Installation is performed in the reverse order.

Test yourself

A quick Toyota Corolla quiz: every answer comes with an explanation and a link to the manual page.