General information on automatic transmission fluids
In this manual: General information on automatic transmission fluids
~1min read
1.0 GENERAL INFORMATION ON AUTOMATIC TRANSMISSION FLUIDS
Automatic Transmission Fluid was developed especially for automatic transmissions. It requires additives which are carefully matched with each other, a high viscosity index and a solidification point below -40 ºF/-40ºC.
Friction behavior of Automatic Transmission Fluid in plate-type clutches under very different operating conditions is extremely important. Other important factors are:
- Wear protection
- Oil film shear resistance
- Adhesive property
- Oxidation resistance
- Corrosion inhibition
- Sludge prevention
- Temperature-dependent viscosity changes
- Compatibility with sealing materials.
2.0 OIL ADDITIVES
Automatic transmissions are designed so that oil additives are not necessary. BMW disapproves the use of any oil additives and cannot accept the liability for any consequential damage which results from using oil additives.
Test yourself
A quick BMW X3 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?