Pump and oil supply
In this manual: Pump and oil supply
~1min read
INSTRUCTIONS FOR REMOVING AND INSTALLING EAR CLIPS
Special tools required:
- 32 1 260
NOTE: The work steps are show on assorted components. Ear clip must always be replaced.
To remove an ear clip, place special tool 32 1 260 at right angles to ear and cut ear open.

The ear clip can be fitted not only axially but also radially after the hook fastener has been opened.

Attach hook fastener and press ear together with special tool 32 1 260.

The diagonal cutting pliers of special tool 32 1 260 can be used in areas which are difficult to access.

IMPORTANT: Gap (A) max. 1 mm!

ELECTRONIC POWER STEERING
START-UP OF ICM CONTROL UNIT
NOTE: Start-up of ICM control unit must be carried out:
- After replacement or removal and installation of ICM control unit
Connect vehicle to BMW diagnosis system.
Select and carry out start-up of ICM control unit under Service functions.
Test yourself
A quick BMW X3 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?