With suspension
In this manual: With suspension
~1min read
REMOVING AND INSTALLING/REPLACING REAR LEFT OR RIGHT COIL SPRING
Installation note:
1. All screws, nuts, bolts and hose clamps removed during the repair must be replaced.
2. Retaining elements on chassis and suspension and steering parts must be replaced.
IMPORTANT:
- Both coil springs on the relevant axle must be replaced in the event of corrosion breakage.
- The spring pads at the top and bottom must also be renewed when replacing the coil springs.
NOTE: The process is described in THE REAR LEFT OR RIGHT SPRING STRUT.
After installation:
- Check headlight adjustment, correct if necessary.
Test yourself
A quick BMW X3 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?