Switches and relays
In this manual: Switches and relays
~1min read
REPLACING POWER DISTRIBUTION MODULE (N20, N52T, N55)
Necessary preliminary tasks:
- Switch off ignition.
- Disconnect BATTERY NEGATIVE LEAD .
- Remove left service flap on cowl panel cover.
Unlock and pull off all connectors (1) from power distribution module.
Remove cover (2).
Release nut beneath it and set positive battery cable aside.
Release lock (3).
Feed out and remove power distribution module in upward direction.

Reassemble the vehicle.
Test yourself
A quick BMW X3 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?