Body (Interior / Exterior / Electrical)
Smart Key System Description and Operation
In this manual: Body (Interior / Exterior / Electrical)
48steps
~288min
4/5difficulty
Done 0 of 48
Description
Main Features of The Smart Systems
- Vehicle entry and control through driver and passenger doors and tailgate.
- Detecting the presence or absence of a smart key indoor for starting the EV.
- Communication via smart key system.
- Locking and unlocking the door through the button on the driver/passenger door outside handles.
- Entry via tailgate outside handle switch
- Up to 2 smart keys can be operated.
Function
Unlocking Doors Vehicle status : All doors are locked and POWER ON.- The user presses the door lock button on the door handle.
- The BDC - SMK uses the antenna on the door handle to find the smart key.
- The smart key transmits a response signal and data using an internal antenna, receives data from the BDC-SMK using a receiver, and verifies the authentication key.
The BDC - SMK can verify smart keys within 0.7 - 1 m (2.2 - 3.2 ft.) from the door handle. - The BDC - SMK transmits a door unlock signal to the powernet domain controller via the CAN communication line.
- After receiving the door unlock signal, the powernet domain controller executes all doors unlock operations.
a. It takes 0.5 seconds to open the door after pressing the button on the door handle, so if you pull the handle before 0.5 seconds, the door will not open. b. Door lock/unlock by smart key is possible only when all doors are closed. - The user presses the door lock button on the door handle.
- The BDC - SMK uses the antenna on the door handle to find the smart key.
- The smart key transmits a response signal and data to the BDC - SMK.
The BDC - SMK can verify smart keys within 0.7 - 1 m (2.2 - 3.2 ft.) from the door handle. - The BDC - SMK transmits a door lock signal to the powernet domain controller via the CAN communication line.
- After receiving the door lock signal, the powernet domain controller executes all doors lock operations.
a. Door lock/unlock by smart key is possible only when all doors are closed. b. When the door locked by the smart key, the door cannot be opened with the smart key for 3 seconds. - Receiving signal distance : Maximum 10 m (32 ft.)
- Holding time : Maximum 10 min.
- Operation method :
- EV Starting: Press the door lock button to lock the doors and press the remote start button for more than 2 seconds within 4 seconds.
- EV Stop : Press the remote start button one time.
- Checking start condition : able to check starting through see blinking of emergency lights.
- Security : During the remote start, if the registered smart key is not present in the vehicle with the driver, the ignition is stopped.
- If the door is opened, it searches for the presence of a smart key in the vehicle every 3 seconds.
- After the smart key is found in the vehicle, it maintains the authentication status for 3 seconds and then searches again.
- If the door is closed, it searches inside the vehicle.
- When the door is opened, the interior is periodically searched every 3 seconds for starting. If there is a smart key, authentication is maintained, and if there is no smart key, authentication is canceled and the interior is searched again every 3 seconds even if it is authenticated.
- When the door is closed, it searches the inside the vehicle again, and if there is a smart key, the authentication is maintained for 30 seconds, and the search is not performed again.
- Set the gear lever to 'P' or 'N', then press down the brake pedal and press the start/stop button.
- Search for a smart key in the vehicle inside.
- When a smart key is found in the inside the vehicle, the vehicle control unit makes it possible to start.
- Authentication
- If there is no authentication information when POWER OFF is switched to POWER ON, searches it and determine whether to authentication.
- If authenticated in POWER ON state, authentication is maintained continuously (If requested by vehicle control unit)
- If there is no smart key inside the vehicle after searching for an external antenna, transponder communication is automatically attempted even if the key is not entered.
- When at least one or more doors are open when POWER is ON.
- When there is a smart key inside the vehicle
- Checks if the smart key is inside the vehicle when trying to lock the door.
- When a smart key is detected inside the vehicle, the door switch activates the door opening to prevent the door from locking.
- When at least one door including tailgate/trunk is open when the POWER OFF.
- When there is a smart key inside the vehicle
- When all doors are closed, including the tailgate/trunk.
- When a smart key is detected inside the vehicle, the door switch unlocks all the doors in the vehicle and the BDC - SMK operates the external buzzer.
- Vehicle status conditions
- POWER ON
- All doors are closed
- Door Lock Warning 1 verification process
- The user presses a button on a door handle or a tailgate button.
- BDC - SMK searches for smart keys through door handles or external antennas.
- The response signal from the smart key are transmitted to the BDC - SMK.
- The BDC - SMK operates the external buzzer.
- Vehicle status conditions
- POWER OFF
- At least one door is open and the door switch is locked.
- Door Lock Warning 2 verification process
- The user presses a button on a door handle
- BDC - SMK finds the smart key through the door handle or external antenna.
- The response signal from the smart key are transmitted to the BDC - SMK.
- The BDC - SMK operates the external buzzer.
- Vehicle status conditions
- POWER OFF
- At least one door is open and the door switch is unlocked.
- Door Lock Warning 3 verification process
- The user presses a button on a door handle
- BDC - SMK finds the smart key through the door handle or external antenna.
- The response signal from the smart key are transmitted to the BDC - SMK.
- The BDC - SMK operates the external buzzer.
- A function to warn when user leaving the vehicle when POWER ON.
- If there is a smart key inside, try authentication again, and when the smart key responds, the authentication state is maintained and the interior and exterior buzzers are stopped.
- ID OUT verification process
- POWER ON
- At least one door is open
- Close all doors of the vehicle. (when no smart key is found in the vehicle inside)
- Warn with a buzzer. (About 3 seconds)
- When the vehicle moves below 3 km/h and POWER ON, and one or more doors are open, it searches inside the vehicle every 3 seconds, and the warning light flashes if the smart key is not inside the vehicle.
- With all doors closed, there are no more warnings if the smart key is retrieved only once.
Was this page helpful?