System Description
SYSTEM DESCRIPTION
SYSTEM OPERATION
Function | General Description |
|---|---|
Push-button start function |
When the electronic key transmitter is brought inside the vehicle and verified, this function changes the power supply mode or starts the engine when the engine switch and the brake pedal are operated. HINT: If an emergency stop has been performed (the engine switch has been pressed quickly at least three times, or held down for at least 2 seconds) while the vehicle is moving, the engine can be restarted if the vehicle speed is above 5 km/h, by moving the shift lever to N and pressing the engine switch. |
Key transmitter battery saver function |
If a switch on the electronic key transmitter is pressed and held, this function stops transmitting that signal after approximately 20 seconds to save the transmitter battery power. |
Transmitter battery saving mode function |
|
Key cancel function |
Disables the smart key system when certain operations are performed. |
Immobilizer function |
Allows the engine to be started only with registered electronic key transmitters, to prevent unauthorized engine starting. |
Automatic power off function |
|
DETECTION AREA
NOTICE:
- Depending on the shape of the vehicle body, the electronic key transmitter may not work in some locations.
- Even if the electronic key transmitter is inside the vehicle key detection area, it may not be properly detected if it is on the instrument panel, in the glove box or on the floor.
- Depending on the orientation in which the electronic key transmitter is held, it may not operate properly.
- The size of the key detection area may decrease, or the electronic key transmitter may not be detected properly, under the following conditions:
- The transmitter battery is depleted.
- Television broadcast stations, power plants, radio stations, gas stations or other areas with strong radio wave emissions or electrical noise are nearby.
- Electronic devices, such as mobile phones, are near the electronic key transmitter.
- The electronic key transmitter is in contact with or covered by a metal object.
- A radio wave type keyless entry system or remote control system is being used nearby.
- The electronic key transmitter is placed near high-voltage equipment or equipment that emits electrical noise.
(a) The detection area inside the vehicle is formed and the electronic key transmitter is detected when any of the following conditions is met: 1) the driver's door is opened and closed, 2) the brake pedal is depressed, 3) the engine switch is operated, 4) the conditions required for various warnings are met, or 5) a door lock operation is performed upon entry.
(b) The setting of the detection area inside the vehicle when starting the engine can be customized.
Click here![]()