Theft Deterrent / Keyless Entry
Symptom Table
In this manual: Theft Deterrent / Keyless Entry
~1min read
SYMPTOM TROUBLESHOOTING TABLE
HINT:
- Use the table below to determine the cause of the symptoms. If several suspected areas are listed, the possible causes of the symptom are shown in order of probability in the "Suspected Area" column of the table. Check each symptom, verifying the suspected areas in the order listed. Replace parts if necessary.
- Check the fuses and relays related to the system before checking the components listed below.
- If the problem occurs in certain locations or at certain times of day, the risk of radio wave interference may be high.
- If a malfunction occurs after optional components are installed at a dealer, check that the components do not cause wave interference.
Symptom | Suspected Area | Link |
|---|---|---|
Power source mode does not change to ON (IG) or ON (ACC) |
Refer to "Power Source Mode Does Not Change to ON (IG and ACC)" |
|
Power source mode does not change to ON (IG) |
Refer to "Power Source Mode Does Not Change to ON (IG)" |
|
Power source mode does not change to ON (ACC) |
Refer to "Power Source Mode Does Not Change to ON (ACC)" |
|
Engine does not start |
Refer to "Engine Does Not Start" |
Was this page helpful?
.gif)