When a malfunction is not confirmed by the DTC check, troubleshooting should be carried out in all circuits considered to be possible causes of the problem. In many cases, by carrying out the basic engine check shown in the following flowchart, the location of the problem can be found quickly and efficiently. Therefore, using this check is essential when performing engine troubleshooting.
PROCEDURE
CHECK BATTERY VOLTAGE
NOTICE:
Conduct this check with the engine stopped and ignition switch off.
Result
Proceed to
11 V or more
OK
Below 11 V
NG
NG
CHARGE OR REPLACE BATTERY
OK
CHECK WHETHER ENGINE WILL CRANK
NG
PROCEED TO PROBLEM SYMPTOMS TABLE
OK
CHECK WHETHER ENGINE STARTS
NG
GO TO STEP 6
OK
CHECK AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
(a) Visually check that the air filter is not excessively contaminated with dirt or oil.
NG
REPLACE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
OK
CHECK IDLING SPEED
NG
TROUBLESHOOT IDLING SPEED AND PROCEED TO NEXT STEP
OK
CHECK FUEL PRESSURE
NG
TROUBLESHOOT FUEL PRESSURE AND PROCEED TO NEXT STEP