Mounting the bicycle rack mount

In this manual: Mounting the bicycle rack mount
About this Owner's Manual — 1Illustrated index — 1Symbols in the instrument cluster — 1Warning and information texts — 1Introduction to the instrument cluster — 1ID. Light — 1Service menu/ Service display — 1Limits of the Driver Alert System — 1Correct seating position — 1Automatic safety belt retractor, safety belt pretensioner, safety belt load limiter — 1Indicator light — 1Installation locations and deployment zones of the airbags — 1Switching the Front Passenger's Front Airbag On and Off — 1Types of child restraints — 1Securing yourself and the vehicle — 1Emergency equipment — 1Information Call, Roadside Assistance Call and Emergency Call Service — 1Troubleshooting — 1Legally required eCall Emergency System — 1Vehicle key functions — 1Unlocking or locking using Keyless Access — 1Child safety lock — 1Anti-theft alarm system — 1Interior monitoring and towing protection — 1Opening and closing the trunk lid — 1Opening and closing the windows — 1Power window pinch protection — 1Adjusting the steering wheel position — 1Manually adjusting front seats — 1Adjusting the head restraints — 1Removing and installing the head restraints — 1Center armrest — 1Memory function — 1Massage feature — 1Switching the turn signals on and off — 1Switching the lights on and off — 1Switching the high beam headlights on and off — 1Switching the poor weather lights on and off — 1Switching on and off the rear fog light — 1Switching the parking light on and off — 1Entry and exit lighting (orientation lighting) — 1Headlight range control — 1Interior/reading lights, ambient lighting — 1Operating the windshield wiper lever — 1Rain/light sensor — 1General safety precautions — 1Overview of the Climatronic — 1Overview of seat heating — 1Operating the stationary air conditioning — 1Programming the stationary air conditioning — 1Functions of the electric drivetrain — 1Steering information — 1Information on the pedals — 1Information on the brakes — 1Switching the ignition on and off — 1Activating the vehicle's drive system — 1Exiting a vehicle while the vehicle's drive system is active — 1Deactivating the vehicle's drive system — 1Driving mode selector — 1Brake energy recuperation — 1Selecting the driving mode — 1Standard behavior of the driving mode and the vehicle systems — 1Eco tips — 1Operating the vehicle in different countries and continents — 1Limits of the sensor system — 1Operating the cruise control system — 1Operating the speed limiter — 1System Limitations of the Predictive Control — 1Driving with predictive control — 1Eco assist — 1Special driving situations — 1System Limitations of ACC — 1Switching ACC on and off — 1Adjusting the ACC settings — 1System Limitations of Predictive Cruise Control — 1Driving with predictive cruise control — 1Warning levels and braking support — 1System Limitations of Front Assist — 1Oncoming vehicle braking when turning — 1Lane Assist system limitations — 1Driving with Lane Assist — 1Operating Travel Assist — 1Using assisted lane changing — 1Driving with Emergency Assist — 1Side Assist system limitations — 1Driving with Side Assist — 1Parking — 1Electronic parking brake — 1Auto Hold — 1Safety instructions — 1Automatic braking intervention — 1Switching Park Distance Control (PDC) on and off — 1Parking (Rear View Camera system with parking mode selection) — 1Changing the camera perspective — 1Searching for parking spaces — 1Calibrating the parking process — 1Displaying and editing parking spaces — 1Driving into or out of a parking space — 1Rear Traffic Alert — 1Information about braking assistance systems — 1Switching ASR Sport on and off — 1Sockets in the vehicle — 1Cyber security — 1Downloading and installing an Over-the-Air Update — 1V2X limitations — 1Activating and deactivating V2X — 1Traffic hazard alert — 1USB port — 1Bluetooth interface — 1Setting up the Internet connection — 1Activating and deactivating a Wi-Fi hotspot — 1Apple CarPlay — 1Android Auto — 1MirrorLink — 1Introduction to online services — 1Viewing and enabling functions — 1Safety instructions — 1Overview of Infotainment system — 1Brands, licenses, copyright — 1Functions and radio symbols — 1Setting a 360º range display and Electric Vehicle Route Planner — 1Stowing luggage and cargo — 1Mounting the bicycle rack mount — 1Information on the roof rack — 1Warning signs for the high-voltage system — 1Handling the high-voltage battery — 1Charging — 1Placement — 1Information on bulb replacement — 1Replacing bulbs in LED headlights — 1Fuses in the hood space — 1Ground jump-start point — 1Instructions for towing — 1Safety precautions for working in the hood space — 1Preparing the vehicle for work in the hood space — 1Operating fluids and operating equipment — 1Charging, replacing, disconnecting, or connecting the 12 V vehicle battery — 1Handling tires — 1Preparing Your Vehicle — 1Maintenance procedures and digital maintenance schedule — 1Information about operating conditions — 1Scope of service — 1Vehicle care information — 1Washing the vehicle — 1Accessories and replacement parts — 1Sensors and Cameras — 1Repairs and technical modifications — 1Airbag system repairs and situations that can affect the system function — 1Mobile phone usage in the vehicle — 1Data Storage and Data Protection Information — 1Event data recorder (crash data recorder) — 1Labels and signs — 1Fluids in the air conditioning system — 1Infotainment system and aerials — 1Disposal of old batteries and electronic devices — 1Product recycling — 1Old vehicle return and scrap disposal — 1Useful information on vehicles with N1 type approval (light commercial vehicle) — 1Radar Sensors — 1Specifications & Consumer information — 1
47steps
~282min
4/5difficulty
Done 0 of 47

Volkswagen ID.3. Fig. 1 On the rear of the vehicle: license plate holder.
Fig. 1 On the rear of the vehicle: license plate holder.

Volkswagen ID.3. Fig. 2 Overview: Removable bicycle rack mount.
Fig. 2 Overview: Removable bicycle rack mount.

  1. Ball mount.
  2. Handwheel.
  3. Centering pin.
  4. Shaft.
  5. Locking balls.
  6. Key.
  7. Gap (pre-tensioned bicycle rack mount).
  8. White marking on the bicycle rack mount.
  9. Green marking on the handwheel.
  10. Red marking on the handwheel.

The removable bicycle rack mount is located in the transport bag in the luggage compartment.

Step 1: Preparations

  1. Before using the bicycle rack mount for the first time, note down the number printed on the key. This number will enable you to replace the key if you lose yours.
  2. Fold down the license plate holder in the direction of the arrow→ fig. 1 .
  3. Remove the sealing plug from the bicycle rack mount and store it in the Volkswagen ID.3 vehicle.
  4. Check that the support, the handwheel → fig. 2 (2) , the shaft → fig. 2 (4) and the locking balls → fig. 2 (5) for the bicycle rack mount are clean and undamaged → . Clean it if necessary.

Step 2: Pre-tensioning the bicycle rack mount

The bicycle rack mount can only be attached properly if it is pre-tensioned.

  1. Hold the bicycle rack mount below the ball mount with one hand → fig. 2 (1) .
  2. Open the lock cover and insert the key into the lock→ fig. 2 (6).
  3. Turn the key clockwise → fig. 2 (6) .
  4. With the other hand, pull the handwheel→ fig. 2 (2) out in the direction of the arrow→ fig. 2 (A) and hold in this position → .
  5. Turn the handwheel → fig. 2 (2) in the direction of the arrow → fig. 2 (B) until it engages.

    The bicycle rack mount is now pre-tensioned. The red marking→ fig. 2 (10) on the handwheel must point to the white marking → fig. 2 (8) on the bicycle rack mount. The handwheel sits visibly clear of the bicycle rack mount. There is a gap of about 4 mm → fig. 2 (7) .

  6. Check that all locking balls → fig. 2 (5) can be inserted fully into the shaft → fig. 2 (4) of the bicycle rack mount.

Step 3: Attaching the pre-tensioned bicycle rack mount to the Volkswagen ID.3 vehicle

Let go of the handwheel on the pre-tensioned bicycle rack mount. When it engages, the handwheel springs back to its original position and can cause injuries → .

  1. Insert the pre-tensioned, removable bicycle rack mount into the support tube.
  2. Push the bicycle rack mount firmly in until it engages. Both centering pins must engage in the supports on the vehicle → fig. 2 (3) .
  3. The handwheel is now in its original position. There is no longer a gap between the handwheel and the bicycle rack mount → fig. 2 (2) .
  4. Turn the key in the handwheel counterclockwise and remove it→ fig. 2 (6) .
  5. It must no longer be possible to turn or pull out the handwhee→l fig. 2 (2) .
  6. Shut the lock cover and store the key in the transport bag.

Step 4: Safety check

Before mounting a bicycle rack, check whether the bicycle rack mount is properly secured.

  • The green marking → fig. 2 (9) on the handwheel points to the white marking→ fig. 2 (8) on the bicycle rack mount.
  • The handwheel must rest on the bicycle rack mount and there must be no gap→ fig. 2 (2) .
  • Firmly wiggle or pull out the bicycle rack mount→ fig. 2 (1) . It must sit securely in the support→ .
  • The lock must be closed and the key removed→ fig. 2 (6) .
  • The lock cover must conceal the lock in the locking lever.

WARNING

Improper installation and use of the bicycle rack mount may cause accidents and serious injuries.

  • Only use the bicycle rack mount if it is attached correctly.
  • Never use a bicycle rack if the bicycle rack mount does not engage correctly or cannot be pre-tensioned.
  • If the bicycle rack mount cannot be installed, have it checked by suitably qualified professionals. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
  • Never use a bicycle rack if the key cannot be removed from the handwheel when the bicycle rack mount is attached. The bicycle rack mount is not properly locked in this case.
  • Always stow the detached bicycle rack mount securely in the luggage compartment.

WARNING

The removable bicycle rack mount is heavy. During the safety check, the bicycle rack mount may fall out and cause crushing injuries.

  • Always proceed with caution when checking the bicycle rack mount.

NOTICE

The support on the Volkswagen ID.3 vehicle and the handwheel, the shaft and the locking balls of the bicycle rack mount must be clean and undamaged. Otherwise, it is not possible to lock the bicycle rack mount securely.

  • Regularly check the mount, the handwheel, the shaft and the locking balls of the bicycle rack mount for damage.
  • Do not aim the jet of a high-pressure washer or steam cleaner directly at the bicycle rack mount holder. Doing so could rinse the grease that is needed for lubrication out of the mount.
  • Removing the bicycle rack mount
  • Attaching a rear carrier system or bicycle rack to the bicycle rack mount

Removing the bicycle rack mount

Volkswagen ID.3. Fig. 1 Overview: Removable bicycle rack mount.
Fig. 1 Overview: Removable bicycle rack mount.

  1. Ball mount.
  2. Handwheel.
  3. Centering pin.
  4. Shaft.
  5. Locking balls.
  6. Key.
  7. Gap (pre-tensioned bicycle rack mount).
  8. White marking on the bicycle rack mount.
  9. Green marking on the handwheel.
  10. Red marking on the handwheel.
  11. Open the lock cover and insert the key → fig. 1 (6) into the lock.
  12. Turn the key clockwise → fig. 1 (6) .
  13. Hold the bicycle rack mount → fig. 1 (1) with one hand → .
  14. With the other hand, pull the handwheel→ fig. 1 (2) out in the direction of the arrow→ fig. 1 (A) and hold in this position.
  15. Turn the handwheel → fig. 1 (2) in the direction of the arrow → fig. 1 (B) until it engages.
  16. Hold the handwheel → fig. 1 (2) in this position and guide the bicycle rack mount out of the support. The bicycle rack mount is now pre-tensioned.
  17. Release the handwheel → fig. 1 (2) and store the pre-tensioned bicycle rack mount securely in the transport bag. Secure the bag to one of the tie-downs in the luggage compartment.
  18. Insert sealing plugs into the bicycle rack mount support.
  19. Fold up the license plate holder.

WARNING

The removable bicycle rack mount is heavy. When removed, the bicycle rack mount could fall down and cause crushing injuries.

  • Always take care when removing the bicycle rack mount.

Attaching a rear carrier system or bicycle rack to the bicycle rack mount

Rear carrier systems are understood to include, for instance, bicycle racks or storage containers, which are attached to the bicycle rack mount.

Only use rear carrier systems that are provided for the Volkswagen ID.3 vehicle model, model year and vehicle equipment by the corresponding manufacturer → .

Volkswagen recommends the use of Volkswagen original parts or Volkswagen original accessories, which you can acquire from an authorized Volkswagen dealer or authorized Volkswagen Service Facility.

Attach the rear carrier system according to the manufacturer's instructions.

Maximum load of the rear carrier system

Volkswagen ID.3. Fig. 1 Recommended weight distribution on the rear carrier system.
Fig. 1 Recommended weight distribution on the rear carrier system.

The carrying load is made up of the rear carrier system and the load transported on it.

The maximum recommended carrying load for the rear carrier system attached to the bicycle rack mount may vary from the Volkswagen ID.3 vehicle-specific trailer tongue weight rating for the vehicle.

However, do not exceed the model-dependent maximum trailer tongue weight rating of the bicycle rack mount.

The carrying load is reduced due to the effect of leverage, the further the center of gravity of the rear carrier system is from the ball mount.

Position heavy items as close to the bicycle rack mount as possible→ fig. 1 .

Vehicle-specific maximum carrying load

To find out the recommended carrying load for your Volkswagen ID.3 vehicle, check the trailer tongue weight rating of your vehicle .

The carrying load can then be found in the following table. In accordance with Directive UN-R 55, Volkswagen recommends complying with the specified number of bicycles on the rear carrier system.

Volkswagen ID.3. Vehicle-specific maximum carrying load

Maximum overhang of the rear carrier system

Volkswagen ID.3. Fig. 2 General example of the maximum overhang on one bicycle rack for two or three bicycles.
Fig. 2 General example of the maximum overhang on one bicycle rack for two or three bicycles.

  1. For a carrying load up to 55 kg (121 lbs): 500 mm (approx. 19.7 inches).
  2. For a carrying load of 75 kg (165 lbs): 700 mm (approx. 27.6 inches).

On bicycle rack systems with two bicycles, the maximum overhang must not exceed 500 mm(a pprox. 19.7 inches) from the center of the ball mount to the center of the bar on the last bicycle rack → fig. 2 (A) . On bicycle rack systems with three bicycles, it must not exceed 700 mm (approx. 27.6 inches) → fig. 2 (B) .

WARNING

Improper use of a rear carrier system mounted on the bicycle rack mount can cause accidents and serious or fatal injuries.

  • Ensure that the rear carrier system is suitable for use on your Volkswagen ID.3 vehicle.
  • Always read and follow the assembly instructions provided by the rear carrier system manufacturer.
  • Never secure a rear carrier system on the ball mount below the coupling ball. The rear carrier system could slip because of the shape of the ball mount.

Volkswagen recommends removing as many attachments as possible from the items to be loaded onto the rear carrier system before the journey. This includes bicycle baskets and paniers, child seats and batteries.

This improves the wind load and the center of gravity of the rear carrier system.

Trailer towing information

The Volkswagen ID.3 vehicle is not designed for towing a trailer. No trailer hitch may be retrofitted.

WARNING

Mounting a trailer hitch on the vehicle can result in damage to the vehicle, accidents and serious or fatal injuries when operating the vehicle.

  • Never mount a trailer hitch on the vehicle.