Body
Removal and Installation of Rear Luggage Compartment Trim Panel
In this manual: Body
~1min read
REMOVAL
1. Open the tailgate.
2. Open the side covers in the luggage compartment.
3. Remove one plastic nut (1) on the left and one on the right.
* The accompanying illustration shows the holes with the trim removed.
4. Press out the four clips (2), after removing the retaining pins. 3 - visor of the bolts securing the lower part of the tailgate lock.

5. Lift the trim panel over the luggage compartment lugs and remove it.
INSTALLATION
1. Insert the trim panel into the holes from below using the plastic pins.
2. Insert the clips and press in the retaining pins.
3. Secure the trim panel on the right and left.
Test yourself
A quick BMW 1 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?