BMW 1 Quiz
Body

Central Locking Motor/Microswitch Removal and Installation

In this manual: Body
Introduction — 10Owner's Manual — 29Routine Care and Maintenance — 30Engine — 18Cooling and Heating Systems — 13Fuel and Exhaust Systems — 29Engine Electrical Equipment — 20Manual Transmission — 4Automatic Transmission — 4Clutch and Drive Shafts — 12Brake System — 19Suspension and Steering — 22Body — 36Body Electrical Equipment — 34Electrical Circuit Diagrams — 30On-board diagnostic system — 5
~1min read

REMOVAL

1. Remove the door lock.
2. Using a screwdriver, release the lock (1) and lift the motor (2) up off the lock.

3. Выверните винты крепления (стрелки на сопроводительной иллюстрации).

3. Remove the mounting screws (arrows in the accompanying illustration).
4. Remove the plate (1) and the microswitch (2).

УСТАНОВКА

INSTALLATION

1. Secure the plate (1) and the microswitch (2) with the screws.

2. Установите электродвигатель на замок и зафиксируйте его.

2. Install the motor on the lock and secure it.
3. Install the lock.

Test yourself

A quick BMW 1 quiz: every answer comes with an explanation and a link to the manual page.