Daewoo Nexia Quiz
Engine (Single Overhead Camshaft)

Reaming the Guide Bores

In this manual: Engine (Single Overhead Camshaft)
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

GENERAL INFORMATION.

Warning.

To prevent chipping of the cutting edges and seizure of the reamer, limit the torque applied to the reamer. Thoroughly clean the guide bores of carbon and resinous deposits beforehand. Do not press down hard on the reamer. Valves with enlarged stem diameters may be installed at the factory. Guides and valves with oversize dimensions have special

Guides and valves with oversize dimensions have special

marking (refer to Reaming the Guide Bores illustration).

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.