Daewoo Nexia Quiz
Engine (Single Overhead Camshaft)

Crankshaft Pulley

In this manual: Engine (Single Overhead Camshaft)
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read
0204060801005541N·mlb·ft
Tightening torque found on this page

Remove or disconnect:

PROCEDURE.

1. Disconnect the negative battery cable.

2. Loosen the generator mounting bolts and release the drive belt..

3. Loosen the air conditioning compressor mounting bolts and release the drive belt.

4. Unscrew pulley mounting bolt 144..

Installation

PROCEDURE.

1. Install the pulley onto the crankshaft nose..

2. Tighten the bolt to 55 N·m..

3. Install the belt onto the generator pulley..

4. Install the belt onto the compressor pulley..

5. Negative battery cable.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.