Honda Accord Quiz
V6 Engines

Camshaft Removal

In this manual: V6 Engines
Owner's Manual — 80Maintenance and Adjustments — 43Four-Cylinder Engines — 27V6 Engines — 34Engine General Overhaul and Major Repair — 35Cooling and Heating Systems — 29Fuel and Exhaust Systems — 21Engine Electrical Equipment — 23Engine Control — 315-speed manual transmission (MT) — 74-speed automatic transmission (AT) — 14Clutch and Drive Shafts — 22Brake System — 23Suspension and Steering — 31Body — 41Body Electrical Equipment — 36Electrical Circuit Diagrams — 11
~1min read

REMOVAL
PROCEDURE

1. Remove the cylinder head covers (see Cylinder Head Cover Removal and Installation), the timing belt and sprockets (see Timing Belt and Timing Belt Drive Sprockets Removal, Inspection and Installation).
2. Remove the ignition distributor (see Chapter Engine Electrical).
3. Remove the rocker arm assemblies (see Rocker Arm Assembly Removal, Inspection and Installation).

4. Снимите клапан EGR (см. Главу Управление двигателем) с целью обеспечения доступа

4. Remove the EGR valve (see Chapter Engine Control) to gain access to the camshaft rear retaining plate.

Before removing the camshafts, measure their axial play.

5. Снимите пластину держателя заднего распределительного вала.

5. Remove the rear camshaft holder plate.

6. Аккуратно извлеките распределительный вал из головки цилиндров, стараясь не

6. Carefully remove the camshaft from the cylinder head, taking care not to damage the cam lobes and journals.

Test yourself

A quick Honda Accord quiz: every answer comes with an explanation and a link to the manual page.