Honda Accord Quiz
V6 Engines

Oil Pump Removal

In this manual: V6 Engines
Owner's Manual — 80Maintenance and Adjustments — 43Four-Cylinder Engines — 27V6 Engines — 34Engine General Overhaul and Major Repair — 35Cooling and Heating Systems — 29Fuel and Exhaust Systems — 21Engine Electrical Equipment — 23Engine Control — 315-speed manual transmission (MT) — 74-speed automatic transmission (AT) — 14Clutch and Drive Shafts — 22Brake System — 23Suspension and Steering — 31Body — 41Body Electrical Equipment — 36Electrical Circuit Diagrams — 11
~1min read

REMOVAL
PROCEDURE

1. Remove the timing belt, crankshaft sprocket and idler pulley (refer to Timing Belt and Timing Sprockets Removal, Inspection and Installation).

Leave the engine mount bracket attached on the end of the engine facing the timing belt.
2. Remove the crankshaft position (CKP) sensor.

3. Снимите поддон картера двигателя (см. Раздел Снятие и установка поддона картера

3. Remove the engine oil pan (refer to Engine Oil Pan Removal and Installation) and the oil pump strainer. If equipped, remove the engine oil level sensor.

4. Remove the oil filter adapter assembly with the VTEC solenoid valve (in front of the oil pump) (refer to VTEC System - General Information and Component Inspection).

5. Выверните крепежные болты и отделите кожух масляного насоса от двигателя.

5. Remove the mounting bolts and separate the oil pump cover from the engine. It may be necessary to insert a lever between the main bearing cap and the pump cover.
Check the gear end play using a feeler gauge (blade type) and a straightedge.

Test yourself

A quick Honda Accord quiz: every answer comes with an explanation and a link to the manual page.