Operating the windshield wiper lever

In this manual: Operating the windshield wiper lever
About this Owner's Manual — 1Explanations — 1Explanation of symbols — 1View from the front — 1Rear view — 1Driver door — 1Driver side — 1Center console — 1Passenger's side — 1Symbols in the instrument cluster — 1Warning and information texts — 1Introduction to the instrument cluster — 1Operating the Volkswagen Digital Cockpit — 1Volkswagen Digital Cockpit information displays — 1Correct seating position — 1Emergency equipment — 1Information Call, Roadside Assistance Call and Emergency Call Service — 1Vehicle key functions — 1Interior monitoring and towing protection — 1Opening and closing the trunk lid — 1Opening and closing the windows — 1Adjusting the steering wheel position mechanically — 1Adjusting front seats — 1Folding the rear bench seat backrest forward or backward — 1Adjusting the head restraints — 1Switching the turn signals on and off — 1Switching the lights on and off — 1Switching the high beam headlights on and off — 1Operating the windshield wiper lever — 1Interior rearview mirror — 1Sun visors — 1Overview of the Climatronic — 1Overview of Seat Heating and Seat Ventilation — 1Windshield defroster — 1Operating the stationary air conditioning — 1Functions of the electric drivetrain — 1Steering information — 1Information on the pedals — 1Information on the brakes — 1Switching the ignition on and off — 1Driving mode selector — 1Information about energy recuperation — 1Selecting the driving mode — 1General driver information — 1Eco tips — 1Eco assist — 1Warning levels and braking support — 1Operating Travel Assist — 1Using assisted lane changing — 1Driving with Emergency Assist — 1Side Assist system limitations — 1Driving with Side Assist — 1Parking — 1Switching Park Distance Control (PDC) on and off — 1Switching the Rear View Camera system on and off — 1Volkswagen App for Park Assist with Remote Control — 1Cup Holder in the Rear Center Armrest — 1Sockets in the vehicle — 1Requirements for an Over-the-Air Update — 1Downloading and installing an Over-the-Air Update — 1System function of V2X — 1Traffic hazard alert — 1USB port — 1Bluetooth interface — 1Setting up the Internet connection — 1Symbols and settings for App-Connect — 1Setting Up Volkswagen ID — 1Ordering Services and Activation in the Vehicle — 1Setting, Changing and Resetting the S-PIN — 1Managing Users — 1Status display — 1Impact on online vehicle functions — 1Customizable vehicle settings — 1Viewing and enabling functions — 1Safety instructions — 1Brands, licenses, copyright — 1Overview of Infotainment system — 1Cleaning the screen — 1Playing a Media File — 1Functions and symbols of the navigation system — 1Coupling, connecting and managing — 1Introduction to the Voice Assistant — 1Stowing luggage and cargo — 1Hitching a trailer — 1Attaching a rear carrier system or bicycle rack to the ball mount — 1Mounting a roof rack — 1Loading the roof rack — 1Warning signs for the high-voltage system — 1Charging cable for charging stations with alternating current (AC) — 1Charging cable for mains sockets — 1Placement — 1Fuses in the hood space — 1Ground jump-start point — 1Instructions for towing — 1Engine coolant specifications — 1Brake fluid specifications — 1Checking the Brake Fluid — 1Checking the 12 V vehicle battery acid level — 1Charging, replacing, disconnecting, or connecting the 12 V vehicle battery — 1Handling tires — 1Preparing Your Vehicle — 1Maintenance procedures and digital maintenance schedule — 1Vehicle care information — 1Accessories and replacement parts — 1Sensors and Cameras — 1Repairs and technical modifications — 1Airbag system repairs and situations that can affect the system function — 1Mobile phone usage in the vehicle — 1Paint and vehicle body warranty — 1Data Storage and Data Protection Information — 1Event Data Recorder (EDR) — 1Labels and signs — 1Fluids in the air conditioning system — 1Product recycling — 1Manufacturer addresses — 1
13steps
~78min
3/5difficulty
Done 0 of 13

Fig. 1 On the left-hand side of the steering column: lever for turn signal, high beam and windshield wiper.
Fig. 1 On the left-hand side of the steering column: lever for turn signal, high beam and windshield wiper.

The windshield wipers only work when the ignition is switched on and the driver door, front passenger door and hood are closed.

  1. Operate the windshield wiper.
  2. Operate the one-tap wiping and automatic wiper/washer system of the windshield wipers.

Switching on the Windshield Wipers

  1. Switch the ignition on.
  2. Turn the switch to the required position→ fig. 1 (1) :

Fast wiping.

Slow wiper speed.

Vehicles without rain/light sensor: Intermittent wiping. The wiping interval can be set in two stages.

Vehicles with rain/light sensor: Automatic wiping depending on how hard it is raining. The sensitivity of the rain/light sensor can be adjusted in two stages.

Switching off the Windshield Wipers

  1. Turn the switch → fig. 1 (1) to the position.

Switching One-tap Wiping (Brief Wiping) on and off

  1. Switch the ignition on.
  2. Press the button → fig. 1 (2) up to the first stage → .

To switch off the one-tap wiping, release the button.

Switching the Automatic Wiper/Washer System for Cleaning the Windshield on and off

  1. Switch the ignition on.
  2. Press the button → fig. 1 (2) up to the second stage → .

To switch off the automatic wiper/washer system, release the button.

While the automatic wiper/washer system is active, the Climatronic system switches to recirculation mode for approximately 30 seconds to help prevent the windshield washer fluid odor from entering the vehicle interior.

WARNING

Without the sufficient freeze protection, washer fluid can freeze on the window glass and reduce visibility. This can cause accidents and serious or fatal injuries.

  • Only use the washer system with sufficient freeze protection in winter temperatures.
  • Never use the window washer system in winter temperatures if the windshield has not been warmed up with the air conditioning system.

WARNING

Worn or dirty wiper blades reduce visibility and increase the risk of accidents and serious injuries.

  • Always replace wiper blades if they are damaged or worn and are no longer cleaning the window glass sufficiently (→ Wiper blades) .

NOTICE

Incorrect handling of the windshield wipers can cause damage to the windshield, the wiper blades and the wiper motor.

  • Before driving and before the ignition is switched on, check that the windshield wiper lever is in the basic position.
  • Remove any snow and ice from the windshield wipers and the windshield.
  • Always carefully loosen wiper blades that have frozen onto the windshield from the windshield.
  • Do not turn on the windshield wipers when the windshield is dry.

The activated wiper speed temporarily changes to the next lower speed when the vehicle is stationary.

If the driver door is opened when the vehicle is stationary, the windshield wipers move back to their initial position and are switched off. If the door is shut again within a few seconds or the windshield wiper lever is moved, the windshield wipers are switched back on again.

Some settings can be saved in the driver personalization user profiles and will change when the user profile is switched.

When parking the vehicle in cold weather conditions, moving the windshield wipers to the service position may be helpful for loosening the wiper blades more easily from the windshield (→ Wiper blades) .

Wiper function

Heated washer nozzles

The heat thaws frozen washer fluid nozzles. The heat output is automatically regulated when the ignition is switched on and is dependent on the outside temperature. Only the window washer nozzles are heated and not the washer fluid hoses.

  • Rain/light sensor
  • General safety precautions

Rain/light sensor

Fig. 1 On the left-hand side of the steering column: lever for turn signal, high beam and windshield wiper.
Fig. 1 On the left-hand side of the steering column: lever for turn signal, high beam and windshield wiper.

  1. Rain/light sensor deactivated.
  2. Rain/light sensor activated, stage 1.
  3. Rain/light sensor activated, stage 2.

When switched on, the rain/light sensor automatically adjusts the delay between wiping cycles and the speed of the windshield wipers depending on how hard it is raining.

Automatic wiping can be activated and deactivated in the vehicle settings in the Infotainment system (→ Vehicle settings menu) → .

Activating the Rain/Light Sensor

  1. Switch the ignition on.
  2. Turn the switch to the required position→ fig. 1 :
  • Position B : low sensitivity of the rain/light sensor.
  • Position C : high sensitivity of the rain/light sensor.

If automatic wiping is deactivated in the Infotainment system, the interval time will be set in fixed stages.

Deactivating the Rain/Light Sensor

  1. Turn the switch to position → fig. 1 (A) .

WARNING

The rain/light sensor cannot detect all precipitation sufficiently and activate the windshield wipers accordingly.

Reduced visibility can cause accidents and serious or fatal injuries.

  • If necessary, switch on the windshield wipers manually if water on the windshield is impairing visibility.

Some settings can be saved in the driver personalization user profiles and will change when the user profile is switched.

Troubleshooting

Washer fluid level too low

The yellow indicator light turns on.

  1. Fill the washer fluid reservoir (→ Washer fluid) .

Windshield wiper malfunction

The yellow indicator light turns on.

The windshield wipers are not working.

  1. Contact a suitably qualified professional. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.

Rain/light sensor malfunction

The yellow indicator light turns on.

The windshield wipers will not be automatically activated in rain/light sensor mode when it is raining.

  1. Contact a suitably qualified professional. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.

Changes to rain/light sensor reaction

Some possible reasons for malfunctions and misinterpretations in the sensor area of the rain/light sensor (→ Front view) could be:

  • Damaged wiper blades: damaged wiper blades can leave a film of water or streaks on the window, and this can extend the activation time, greatly shorten the wiper intervals, or cause fast wiping time.
  • Insects: insects hitting the windshield may trigger the wipers.
  • Salt streaks: salt streaks on the windshield from driving in the winter can cause the wipers to wipe more frequently or continuously on a window that is almost dry.
  • Dirt: dried dust, wax, any other build-up on the windshield (lotus effect), or washing product residue (car wash) can lower the sensitivity of the rain/light sensor and cause it to react too slowly or not at all. Clean the sensor area for the rain/light sensor regularly and check the wiper blades for damage (→ Vehicle care exterior) .
  • Crack in the windshield: if a stone strikes and chips the sensor area while the rain/light sensor is on, this will trigger a wiper cycle. After that, the rain/light sensor will detect this irregularity on the sensor surface and react to it. Depending on the size of the chip, the reaction behavior of the rain/light sensor may or may not change.

If there is an obstacle for the wipers on the window glass, the wipers will attempt to remove it. If it continues to block the wipers, the wipers will stop moving.

  1. Remove the obstacle and switch the wipers on again.

General safety precautions

Using the outside mirrors and the interior rearview mirror, the driver can observe traffic and adjust their driving based on traffic.

For driving safety, it is important that the driver adjusts the outside mirrors and the interior rearview mirror correctly before starting to drive.

It is not possible to oversee the entire side and rear area of the vehicle by looking in the outside and interior rearview mirrors. These areas that are not visible are called blind spots. Other road users and objects could be in the blind spot.

WARNING

Adjusting the outside mirrors and interior rearview mirror while driving can distract the driver. This can cause accidents and serious or fatal injuries.

  • Only adjust the outside mirror and interior rearview mirror when the vehicle is stationary.
  • Always make sure that the mirrors are adjusted correctly and visibility to the rear is not limited by ice, snow, fog, or other objects.

WARNING

The view in the outside mirrors and interior rearview mirror does not cover the entire area around the side and rear of the vehicle. Other road users and objects could be in these blind spots. This can cause accidents and serious or fatal injuries.

  • When parking, changing lanes, passing, and turning, always pay attention to your surroundings.

WARNING

Curved mirror surfaces (convex or aspheric) enlarge the field of vision and allow objects in the mirror to appear smaller and farther away. This can make it difficult to estimate the exact distance from the vehicles behind, e.g.

when changing lane. This can cause accidents and serious or fatal injuries.

  • Use the interior rearview mirror as much as possible to more accurately determine the distance to vehicles or other objects behind you.
  • Make sure there is sufficient visibility of the area behind the vehicle.

WARNING

An automatic dimming rearview mirror contains an electrolyte fluid that can leak out if the mirror glass breaks.

Coming into contact with this liquid can irritate the skin, eyes, and respiratory organs, especially in individuals with asthma or similar illnesses. This may cause serious injuries.

  • If electrolyte fluid is swallowed, rinse out the mouth immediately for at least 15 minutes with plenty of water. Do not induce vomiting unless it ordered to do so by a doctor. Call for medical assistance immediately.
  • Immediately get plenty of fresh air and exit the vehicle. If this is not possible, open all the windows and doors.
  • If the electrolyte fluid comes into contact with eyes or skin, wash the affected area immediately for at least 15 minutes with plenty of water and seek medical assistance.
  • If the electrolyte fluid comes into contact with your shoes or clothing, wash it for at least 15 minutes with plenty of water. Clean the shoes and clothing thoroughly before wearing them again.

NOTICE

If the glass on an automatic dimming mirror breaks, electrolyte fluid can leak out. This fluid damages plastic surfaces.

  • Remove any leaking fluid as soon as possible, for instance using a wet sponge.
next pagenext pageSwitching the high beam headlights on and offInterior rearview mirrornext pagenext page

Volkswagen ID.7 2024-2026 Owners Manual

Operating the windshield wiper lever

  • Rain/light sensor
  • General safety precautions

Actual pages

Beginning midst our that fourth appear above of over, set our won’t beast god god dominion our winged fruit image

More Volkswagen autos

  • Volkswagen Polo
  • Volkswagen Golf
  • Volkswagen Touran

More Volkswagen Manuals

  • Volkswagen Tiguan Owners Manual
  • Volkswagen Tiguan Service and Repair Manual
  • Volkswagen Up! Betriebsanleitung

More Manuals

  • Toyota Grand Highlander
  • Audi A6
  • Toyota Corolla Cross
© 2020-2026 Copyright www.vwid7.org