Honda Accord Quiz
Suspension and Steering

Removal and Installation of Front Stabilizer Bar

In this manual: Suspension and Steering
Owner's Manual — 80Maintenance and Adjustments — 43Four-Cylinder Engines — 27V6 Engines — 34Engine General Overhaul and Major Repair — 35Cooling and Heating Systems — 29Fuel and Exhaust Systems — 21Engine Electrical Equipment — 23Engine Control — 315-speed manual transmission (MT) — 74-speed automatic transmission (AT) — 14Clutch and Drive Shafts — 22Brake System — 23Suspension and Steering — 31Body — 41Body Electrical Equipment — 36Electrical Circuit Diagrams — 11
~1min read

PROCEDURE

1. Apply the parking brake. Loosen the front wheel nuts. Raise the front of the vehicle and support it on safety stands. Remove the wheels.

2. Отсоедините от штанги стабилизатора поперечной устойчивости обе стойки.

2. Disconnect both stabilizer links from the stabilizer bar.

3. Выверните болты хомутов крепления штанги стабилизатора к днищу автомобиля.

3. Remove the bolts of the stabilizer bar mounting brackets from the underbody.

4. Remove the stabilizer bar from under the vehicle.
5. Remove the mounting brackets from the bar and carefully inspect the rubber bushings for cracks, hardening, and aging of the material. Replace any defective bushings. Also check the links for loose ball joints and other mechanical damage. Replace any defective components.
6. Install in the reverse order.

Test yourself

A quick Honda Accord quiz: every answer comes with an explanation and a link to the manual page.