Rear Coil Spring Shock Absorber Assembly Removal and Installation

PROCEDURE

1. Loosen the wheel nuts, raise the rear of the vehicle and support it on stands. Remove the rear wheels.

2. Gain access to the upper strut mount.

3. Loosen the upper mount nuts.

Only the two outer nuts should be loosened; the large center nut must remain tightened.
4. To provide clearance, remove the nut and disconnect the upper end of the stabilizer bar link.

5. Remove the bolt from the lower shock absorber mount.

6. Pull the rear hub assembly downward and remove the coil spring shock absorber assembly from under the vehicle.
7. The procedure for inspecting the shock absorber assembly components is the same as described in the Front Suspension Strut Assembly Shock Absorber or Coil Spring Replacement section.
8. Installation is performed in the reverse order. Make sure all fasteners are tightened to the specified torque.