Radio and Speaker Removal and Installation

Radio
PROCEDURE

1. Disconnect the negative battery cable first, then the positive cable.

If the vehicle's audio system is equipped with an anti-theft code, make sure you have the correct code to activate the audio system before disconnecting the battery!
2. Remove the radio assembly trim (see Chapter Body).
3. Remove the mounting screws and remove the radio from its opening in the instrument panel. Disconnect the wiring and antenna cable from the assembly. Remove the radio.

4. Installation is performed in the reverse order.

Speakers
Front Main Speakers
PROCEDURE

1. Remove the front door trim panel (see Chapter Body).

2. Remove the mounting screws, remove the speaker assembly from its seat, and disconnect the wiring connector.

3. Installation is performed in the reverse order.

Rear Speakers
PROCEDURE

1. Inside the luggage compartment, remove the screws securing the speaker trim covers.

2. Inside the vehicle, remove the speaker grille and remove the screws securing the speaker to the rear shelf. Disconnect the wiring connector and remove the speaker.

3. Installation is performed in the reverse order.

Tweeters
PROCEDURE

1. In addition to the standard door and rear speakers, the vehicles covered by this Manual are equipped with tweeters mounted on top of the instrument panel. Pry the tweeters out of the panel using a screwdriver. Disconnect the wiring connector and remove the tweeter.
2. Installation is performed in the reverse order.