Single-Use Parts
Floor Carpet
In this manual: Single-Use Parts
11steps
~66min
3/5difficulty
Done 0 of 11
Contents:
Removal and Installation
Removal
- Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")
- Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")
- Remove the center pillar lower trim. (Refer to Interior Trim - "Center Pillar Trim")
- Remove the cowl side trim (Refer to Interior Trim - "Cowl Side Trim")
- Remove the floor console assembly. (Refer to Floor Console - "Floor Console Assembly")
- Remove the external AMP. (Refer to Body Electrical System - "External AMP")
- Remove the AWD ECU. (Refer to All Wheel Drive (AWD) System - "AWD ECU")
- Remove the rear air vent (A).

- Remove the rear heating duct (A).


- Remove the floor wiring clips (A).


- Remove the floor carpet (A) after removing the clip.

Installation
- Install in reverse order of removal.
Was this page helpful?