Single-Use Parts
Tailgate Trim
In this manual: Single-Use Parts
8steps
~48min
2/5difficulty
Done 0 of 8
Contents:
Components and Components Location
Component

| 1. Cover Shelf Center Trim 2. Luggage Covering Board |
3. Rear Transverse Trim 4. Luggage Side Trim |
Rear Transverse Trim Removal and Installation
Removal
- Remove the luggage covering board (A).

- Remove the rear transverse trim (A) after removing the clips.


Clip position :

Installation
- Install in reverse order of removal.
Luggage Side Trim Removal and Installation
Removal
- Remove the rear transverse trim. (Refer to Tailgate Trim - "Rear Transverse Trim")
- Remove the rear seat cushion and back assembly. (Refer to Rear Seat - "Rear Seat Assembly")
- Remove the rear door scuff trim. (Refer to Interior Trim - "Door Scuff Trim")
- Remove the covering shelf center trim (A) in the direction of the arrow after separating the cable.


- Remove the luggage side trim (A) after removing the screws. [Driver's Side]


[Passenger's side]
Clip position :



Clip position :

- Disconnect the luggage lamp connector (A).

Installation
- Install in reverse order of removal.
Was this page helpful?