Single-Use Parts
Mirror
In this manual: Single-Use Parts
17steps
~102min
4/5difficulty
Done 0 of 17
Contents:
Outside Rear View Mirror Removal and Installation
Removal
- Remove the front quadrant inner cover. (Refer to Front Door - "Front Door Trim")
- Disconnect the outside rear view mirror connector (A).

- Remove the outside rear view mirror assembly (A) after removing the bolts.
Tightening torque : 6.9 - 10,8 N·m

Installation
- Install in reverse order of removal.
Outside Rear View Mirror Disassembly and Reassembly
Special Service Tool
| Tool Name / Number | Illustration | Description |
| Outside Rear View Mirror Glass Remover Tool 0K876 - L2100 |
![]() |
Used when removing outside rear view mirror glass |
| Outside View Mirror Assembly Fixing Stand 0K876 - C5100 |
![]() |
Used when fixing the outside rear view mirror assembly |
Disassembly
|
Mirror
- Remove the mirror (A) by applying slight force, after inserting a remover as shown below.

- Disconnect the mirror heated wire connector (A) and the BCW & RCCW indicator connector (B).

Scalp
- Remove the mirror.
- Remove the scalp (A).


Lower Scalp
- Remove the scalp.
- Remove the lower scalp (A) after removing the screws.

- Disconnect the side camera connector (A).

- Disconnect the side repeater lamp connector.
- Remove the side repeater lamp connector packing (A).

- Disconnect the side repeater lamp connector (A).

- Remove the side repeater lamp connector packing (A).
Reassembly
- Install in reverse order of removal.
Inside Rear View Mirror Removal and Installation
Removal
- Disconnect the battery negative ( - ) terminal.
- Remove the multi sensor blanking cover (A).


Clip position :

- Remove the inside rear view mirror (A) after removing the screw.

Installation
- Install in reverse order of removal.
Was this page helpful?




