Transmission & Driveline
P17f0 Cvt Judder (t/m Inspection)
In this manual: Transmission & Driveline
5steps
~30min
2/5difficulty
Done 0 of 5
DTC DETECTION LOGIC
| DTC | CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition | |
| P17F0 | CVT JUDDER (T/M INSPECTION) [CVT Judder (Transmission inspection)] |
Diagnosis condition | — |
| Signal | — | ||
| Threshold | Malfunction in CVT chain and pulleys | ||
| Diagnosis delay time | — | ||
POSSIBLE CAUSE
CVT chain and pulleys
FAIL-SAFE
Not changed from normal driving
CHECK DTC DETECTION AFTER DIAGNOSIS PROCEDURE
Turn ignition switch OFF and wait at least 10 seconds.
Turn ignition switch ON.
Perform test drive for 5 minutes or more.
Stop the Nissan Murano vehicle.
Check the DTC.
Is "judder" (shake, shudder, single or multiple bumps or viblation) occurred and is "P17F0" detected?
YES>>Go to Diagnosis Procedure.
NO>>INSPECTION END
REPLACE SUB-ASSEMBLY AND INSTALL NEW CONTROL VALVE
Replace sub-assembly and install new control valve. Refer to Disassembly & Assembly.
>>WORK END
Was this page helpful?