Transmission & Driveline

P17f2 Cvt Judder (t/c Inspection)

8steps
~48min
3/5difficulty
Done 0 of 8
DTC Description

DTC DETECTION LOGIC

DTC

CONSULT screen terms

(Trouble diagnosis content)
DTC detection condition
P17F2

CVT JUDDER (T/C INSPECTION)

[CVT judder (Torque Converter Inspection)]
Diagnosis condition —
Signal —
Threshold Malufunction in torque converter
Diagnosis delay time —

POSSIBLE CAUSE

Torque converter

FAIL-SAFE

Not changed from normal driving

DTC Confirmation Procedure

CHECK DTC DETECTION

  1. Start the engine.

  2. With the accelerator pedal position 1/8, accelerate the Nissan Murano vehicle from 0 km/h to 50 km/h.

  3. Drive the vehicle at 50 km/h constant speed for 15 seconds.

  4. Stop the Nissan Murano vehicle with a brake force which allows the vehicle to stop in 10 to 20 seconds.

  5. Repeat steps 2 to 4 above 5 times.

  6. Check the DTC.

Is “P17F2” detected?

YES>>

Go to Diagnosis Procedure.

NO>>

Inspection End.

Diagnosis Procedure

REPLACE TORQUE CONVERTER

  1. Remove transaxle assembly. Refer to Removal and Installation (front wheel drive) or Removal and Installation (all wheel drive).

  2. Replace the torque converter. Refer to Exploded View.

>>

Work End.