Data List / Active Test
DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not determine whether a part is faulty based only on these reference values.
HINT:
The Techstream Data List allows you to read the values or status of switches, sensors, actuators and other components without removing any parts. This non-intrusive check can be very useful, since intermittent conditions or signals can be identified before parts or wiring are moved. Reading the Data List during troubleshooting saves time in diagnosis.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn on the Techstream.
(d) Select the following menus: Body Electrical / Navigation System / Data List.
(e) Depending on the Techstream display, record the Data List.
Body Electrical > Navigation System > Data ListTester display | Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
Battery Voltage |
Battery voltage |
Min.: 0 V, Max.: 24 V |
11 à 14 V |
- |
Active Dimmer |
Active dimmer function |
ON or OFF |
ON: Dimmer function activated ON: Dimmer function activated |
- |
Tail Light SW |
Tail Light Switch |
ON or OFF |
ON: Light control switch in TAIL or HEAD position OFF: Light control switch in OFF position |
- |
Reverse Signal |
Reverse signal |
ON or OFF |
ON: Shift lever in R position OFF: Shift lever is in a position other than R. |
- |
Parking Brake |
Parking Brake Switch |
ON or OFF |
ON: Parking brake applied OFF: Parking brake released |
- |
Ignition |
Ignition Switch |
ON or OFF |
ON: Ignition switch in ON position OFF: Ignition switch in OFF position |
- |
Vehicle Speed |
Maximum value for wheel speed sensor |
Min.: 0 km/h, Max.: 255 km/h |
Vehicle stopped: 0 km/h |
When vehicle is driving at constant speed: No large fluctuation |