Audio / Video

Precautions

~2min read

PRECAUTION

IGNITION SWITCH TERMS

(a) The type of ignition switch used varies depending on vehicle specifications. The terms listed in the table below are used in this section.

Term

Ignition Switch

(Position)

Engine Switch

(Position)

Ignition Switch in OFF position

LOCK

OFF (Locked)

Ignition Switch in ACC position

ACC

ON (ACC)

Ignition Switch in ON position

ON

ON (IG)

Starting the engine

START

ON (Starting)

NOTICE:

  • When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly that was installed in another vehicle is reused, the following may occur:
    • A communication malfunction DTC is stored.
    • The radio and display receiver assembly may not operate normally.
  • When replacing the DCM (Telematics Transceiver), be sure to replace it with a new one.*1
  • After replacing the navigation ECU, if the message "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display screen, update the software of the radio and display receiver assembly.
  • *1: with Manual (SOS) Switch

CAUTION / NOTICE FOR AUDIO AND VIDEO SYSTEM

(a) When replacing any of the following parts, refer to the repair initialization instructions.

Click here

  • Radio and Display Receiver Assembly*1
  • DCM (Telematics Transceiver)*2
  • *1: After replacing the radio and display receiver assembly on vehicles subscribed to paid satellite radio broadcasts, it is necessary to register the SiriusXM Radio ID (with SXM function).

    *2: with Manual (SOS) Switch

CAUTION / NOTICE FOR REPLACING INSTRUMENT CLUSTER ASSEMBLY

(a) When replacing the instrument cluster assembly, replace it with a new part. If an instrument cluster assembly installed in another vehicle is used, the recorded information will not match the information transmitted by the vehicle, and a DTC may be stored.