Audio / Video

Voice guidance does not work

~1min read

PRECAUTION / NOTICE / HINT

NOTICE:

  • Depending on the parts replaced during inspection or maintenance of the vehicle, initialization, registration or calibration may be required. Refer to the precautions for the audio and visual system.

    Click here

  • When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly that was installed in another vehicle is reused, the following may occur:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly may not operate normally.

PROCEDURE

  1. CHECK VOICE GUIDANCE SETTING

(a) Check that the voice guidance setting is not set to OFF.

OK:

The voice guidance setting is not set to OFF.

NG

SELECT A VOICE VOLUME SETTING OTHER THAN "Off"

OK
  1. CHECK AUDIO FUNCTION

(a) Check whether sound is output from a front speaker.

OK:

Sound is audible.

OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

GO TO APPLICABLE SYSTEM AS INDICATED IN THE PROBLEM SYMPTOMS TABLE