Audio / Video

Panel keys do not work

~1min read

PRECAUTION / NOTICE / HINT

NOTICE:

  • Depending on the parts replaced during inspection or maintenance of the vehicle, initialization, registration or calibration may be required. Refer to the precautions for the audio and visual system.

    Click here

  • When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly that was installed in another vehicle is reused, the following may occur:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly may not operate normally.

PROCEDURE

  1. CHECK PANEL SWITCHES

(a) Make sure that no foreign matter is preventing the keys from operating.

OK:

No foreign matter.

NG

REMOVE ANY FOREIGN MATTER

OK
  1. CHECK PANEL SWITCH (FUNCTION CHECK)

(a) Select the "Panel & Steering Switch Check Mode" screen. Refer to Panel & Steering Switch Check in the Function Check.

Click here

(b) Operate the defective switch and check that its status is displayed correctly.

OK:

The switch status is correctly displayed as operating.

OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

GO TO APPLICABLE SYSTEM AS INDICATED IN THE PROBLEM SYMPTOMS TABLE