Automatic Transmission
Rack
In this manual: Automatic Transmission
~1min read
Remove or disconnect

Removal of Rack A. PRESS OR DRIVE THE PLUG OUT OF THE HOUSING BY MOVING THE RACK.
B. APPLY LITHIUM-BASE GREASE TO THE RACK TEETH.
7. STEERING GEAR HOUSING.
8. HOUSING PLUG (LH).
34. RACK.
35. HOUSING PLUG (RIGHT)
PROCEDURE.
1. Screw the tie-rod mounting bolt into the rack hole. Press out or drive out the plug 35 from the housing by moving the rack.
7..
2. Unscrew the bolt. Remove the rack 34 from the housing.
7..
Installation
PROCEDURE.
1. Apply lithium grease to the rack teeth.
2. Insert the rack 34 into the housing.
7..
3. Install the plug 35 in the housing hole.
Test yourself
A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?