Steering wheel

Remove or disconnect

Steering Wheel Removal

PROCEDURE.

1. Disconnect the negative battery cable.

2. Horn pad and horn wiring..

3. Nut and lock washer. Mark the relative position of the steering wheel and.

steering shaft..

4. Remove the steering wheel using puller KM-210A..

5. Detach the contact ring from the steering wheel, if necessary..

Installation

PROCEDURE.

1. Install the contact ring on the steering wheel (if necessary)..

2. Install the steering wheel on the steering shaft, aligning the marks made before

removal. The turn signal lever self-cancelling mechanism must be located on the left.

must be located on the left..

3. Lock washer and nut. Tighten the steering wheel nut on the steering

shaft to 17 N·m..

4. Bend the lock washer tabs..

5. Connect the horn wiring and install the horn pad.