Daewoo Nexia Quiz
Automatic Transmission

Hoses and Lines

In this manual: Automatic Transmission
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

Remove or disconnect:

PROCEDURE.

1. Disconnect the hydraulic lines from the valve and pump..

2. Release the lines from the clips..

3. Remove the lines..

Installation

PROCEDURE.

1. Lines..

2. Secure the lines in the clips..

3. Connect the lines to the valve and pump. Tighten the union nuts to the specified torque..

4. Fill the hydraulic system with power steering fluid..

5. Bleed air from the hydraulic system..

Inspection

PROCEDURE.

Check for fluid leaks. If leaks are found, eliminate them.

causes, and then bleed air from the power steering hydraulic system.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.