Daewoo Nexia Quiz
Automatic Transmission

Pump Drive Pulley

In this manual: Automatic Transmission
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

Remove or disconnect:

PROCEDURE.

1. Remove the belt.

2. Remove the 3 bolts and remove the pulley.

Install or connect

Монтаж насоса рулевого гидроусилителя
Installation of the power steering pump

PROCEDURE.

1. Install the power steering pump on the engine (if the pump was removed).

2. Install the pulley and screw in 3 bolts.

3. Install the belt on the pulley.

4. Adjust the pump drive belt tension.

5. Bleed air from the power steering hydraulic system if the pump was removed.

from the engine.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.