Daewoo Nexia Quiz
Automatic Transmission

Tie Rod Bushings

In this manual: Automatic Transmission
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

Remove or disconnect

Демонтаж втулки из головки рулевой тяги
Removal of bushing from tie rod head A. OPEN-END WRENCH

35,

40. TIE ROD.

36. TIE ROD JOINT BUSHING

PROCEDURE.

1. Tie rods..

2. Remove bushings 36 from rod heads 35 and

40..

Installation

PROCEDURE.

1. Apply a thin layer of grease to the bushings

36..

2. Install bushings 36 into rod heads 35 and

40..

3. Tie rods.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.